Author name: admin

Cannabis Label Versioning Workflow

Cannabis Label Versioning Workflow for Multi-State Brands

Leave a Comment / Blog /

Table of Contents Cannabis Label Versioning Workflow for Multi-State Brands A cannabis label versioning workflow produces state-specific labels from one master template by moving state-variable fields in as print data. If you hold licenses in five states, you do not have five compliance problems. You have a production-control problem. This guide is for cannabis operations,

Cannabis Label Versioning Workflow for Multi-State Brands Read More »

Water-Based vs UV-Cured Label Adhesive

Water-Based vs UV-Cured Label Adhesive: Food & Pharma Guide

Leave a Comment / Blog /

Table of Contents Water-Based vs UV-Cured Label Adhesive: Food & Pharma Guide Water-based adhesives suit dry, ambient containers; UV-cured hot melts suit cold, wet, curved plastics. Neither is inherently food safe. Water-based (aqueous acrylic) label adhesives dry from an emulsion, build adhesion over hours, and suit ambient, dry, high-surface-energy containers such as glass, PET, and

Water-Based vs UV-Cured Label Adhesive: Food & Pharma Guide Read More »

ArrowJet Aqua 800M wide-web water-based inkjet printer producing printed rollstock for confectionery Flexible Packaging In-House.

Is Your Confectionery Brand Ready to Bring Flexible Packaging In-House?

Leave a Comment / Blog /

Table of Contents Is Your Confectionery Brand Ready to Bring Flexible Packaging In-House? In-house flexible packaging pays off for confectionery brands with many SKUs, short reorders, and frequent artwork changes, not high footage alone. Bringing flexible packaging in-house makes sense for confectionery brands that run many SKUs, short reorder quantities, and frequent artwork revisions, not

Is Your Confectionery Brand Ready to Bring Flexible Packaging In-House? Read More »

Label slitting and matrix removal on a roll-to-roll label finishing line.

Label Slitting and Matrix Removal: Where Converters Lose Finishing Time

Leave a Comment / Blog /

Table of Contents Label Slitting and Matrix Removal: Where Converters Lose Finishing Time Label slitting and matrix removal, plus rewinding, cost converters more finishing time than the die through stops, rethreads, and rejected rolls. Most lost finishing time on a label converting line comes from the three steps after the die: matrix removal (breaks and

Label Slitting and Matrix Removal: Where Converters Lose Finishing Time Read More »

Limited-edition spirits label printing featuring ArrowJet Aqua 330R II, ArrowJet UV 330H, and ArrowCut Nova 330R machines for premium bottle labels, faster turnaround, and on-demand production.

Limited Edition Spirits Label Printing: 4 Holiday Delay Fixes

Leave a Comment / Blog /

Table of Contents Limited Edition Spirits Label Printing: 4 Holiday Delay Fixes Limited edition spirits label printing runs late because of the calendar, not the press: four sequential waits push labels past the bottling slot. Limited-edition holiday spirits and wine labels usually miss their bottling date because four waits run one after another: physical proof

Limited Edition Spirits Label Printing: 4 Holiday Delay Fixes Read More »

Curled beer label on a chilled bottle showing cold-storage adhesion failure.

Beer Label Curling in Cold Storage: Diagnose the Mismatch

Leave a Comment / Blog /

Table of Contents Beer Label Curling in Cold Storage: Diagnose the Mismatch Beer label curling in cold storage signals a facestock, adhesive, or application mismatch — rarely just one bad label roll. Beer labels curl in the cooler because paper facestock loses moisture and shrinks while the adhesive underneath stays put, and the temperature drop

Beer Label Curling in Cold Storage: Diagnose the Mismatch Read More »

Paper vs Film Labels

Paper vs. Film Labels: A Substrate Buyer’s Guide

Leave a Comment / Blog /

Table of Contents Paper vs. Film Labels: A Substrate Buyer’s Guide Paper wins on cost and aesthetics in dry, indoor conditions; film wins wherever moisture, cold, chemicals, abrasion, or sunlight appear. Decide by environment and required service life first, then match adhesive and topcoat, then compare price per label. Paper is the correct engineering answer

Paper vs. Film Labels: A Substrate Buyer’s Guide Read More »

In-House Label Printing vs. Print on Demand

In-House Label Printing vs. Print on Demand: Cost by Volume

Leave a Comment / Blog /

Table of Contents In-House Label Printing vs. Print on Demand: Cost by Volume In-house label printing vs. print on demand comes down to a cost-per-label question: compare your fully loaded in-house cost to the outsourced landed cost at your real volume. In-house label printing beats print-on-demand once fully loaded in-house cost per label — substrate,

In-House Label Printing vs. Print on Demand: Cost by Volume Read More »

Pharmaceutical label version control workflow — gate sequence from change record to compliant labels on the line.

Pharmaceutical Label Version Control Workflow for FDA Changes

Leave a Comment / Blog /

Table of Contents Pharmaceutical Label Version Control Workflow for FDA Changes A GMP label version control workflow moves an approved revision to the line: change record, impact review, artwork lock, cutover, destruction. A pharmaceutical label version control workflow is the documented sequence that moves an approved labeling revision into production: a change control record, an

Pharmaceutical Label Version Control Workflow for FDA Changes Read More »