ANY-JET III — Fully Digital One-Stop Label Solution
250W laser. 1600×1600 dpi. 45 m/min. Everything from printing to finished labels — on one platform, in one pass, with zero analog tooling.
The ANY-JET III is the production-class model in the ANY-JET inline press range. It combines a high-durability pigmented aqueous inkjet print engine with a 250W water-cooled CO2 laser finishing system on a single integrated platform, delivering a fully digital one-stop solution for both digital label and flexible packaging production. The entire process — printing, laminating, laser die-cutting, matrix removal, slitting, and dual rewinding — runs in a single automated inline pass without the use of dies, plates, or any conventional cutting tooling.
Where the ANY-JET II is optimised for office-scale in-house label production, the ANY-JET III is built for sustained high-volume output. It supports media up to 350mm wide with a printing area of 324mm, processes at up to 45 m/min through the laser system, and carries CMYK ink tanks of 10 litres per colour for extended production runs without interruption. A 5-minute setup time, optional Autojob Changeover, and intelligent any-FLOW inline workflow software combine to minimise operator time and maximise machine utilisation across complex, multi-format production shifts.
The ANY-JET III supports thermal and cold lamination with liner removal, an optional pneumatic lift for large media rolls up to Ø700mm, and the optional AIMS (Automatic Inline Management Software) for advanced production monitoring. It is a complete production environment in a single footprint.
250W
Water-Cooled CO₂ Laser
1600 × 1600 dpi
Pigmented Aqueous Inkjet
350 mm / 324 mm
Media Width / Print Area
45 m/min
Max Web Speed
10 L per colour
CMYK Ink Capacity
220AC 40Amp
Power Supply
4616 × 1885 × 1215 mm
Machine Dimensions
Overview
Features
Specifications
Overview
Exploit the Full Power of Digital — Digital Printing + Laser Finishing
The ANY-JET III brings the full power of digital production to label finishing. By combining a production-grade inkjet press and a high-power laser cutter on a single integrated platform, it eliminates every analog stage from the label production workflow — no dies, no plates, no offline finishing steps, and no handling between print and finish. The result is a 100% digital inline system that processes labels from raw stock to finished output in one continuous, automated pass.
The print engine is a high-durability pigmented aqueous inkjet system producing output at 1600×1600 dpi — a resolution level suited to fine-detail artwork, colour-critical brand printing, and small-text labels. Pigmented ink chemistry provides improved durability and resistance compared to dye-based alternatives, making the output suitable for demanding label applications including outdoor, industrial, and packaging-adjacent use cases. Each colour carries a 10-litre ink tank, supporting extended production runs without interruption.
The 250W CO2 laser handles full cuts, half cuts, perforations, marking, and scribing at up to 45 m/min. Combined with an integrated thermal or cold laminator, liner removal module, matrix removal system, slitter, and dual rewinding system, the ANY-JET III processes labels from print output through to rewound finished rolls without a single offline step. The optional Autojob Changeover module reads QR codes on each incoming job and updates cutting parameters automatically, allowing the machine to run multi-format production sequences without operator intervention between jobs.
The any-FLOW intelligent inline workflow software ties the entire system together. It manages the complete production pipeline — from colour management and variable data printing through to laser parameter control and job queue management — from a single operator interface. Three operating modes are supported: combined print-and-cut, print only, and cut only, giving the ANY-JET III operational flexibility across different production configurations.
Features
Outcome-led feature blocks. Each reads as a concrete benefit.
01. Fast Turnaround: 5-Minute Setup, Zero Tooling Lead Time
From receiving a new label design to starting production on the ANY-JET III, setup time is approximately 5 minutes. There are no dies to order, no plates to fabricate, and no tooling to install. A new job is a new file — and loading that file takes minutes rather than days. For label producers handling frequent design changes, short-notice orders, or urgent runs, this is a structural operational advantage that conventional finishing cannot replicate.
02. Boost Cost Efficiency Across Every Run
Removing physical tooling from the finishing process eliminates the single largest variable cost in conventional label production. There are no die fabrication charges, no plate fees, and no tooling replacement costs. The optional Autojob Changeover and any-FLOW software further reduce labour requirements by automating job transitions and production management — lowering the cost per label for every run, regardless of volume.
03. Easy to Use: Full Training in Three Days
Despite the operational depth of the ANY-JET III’s inline workflow, full operator training — covering all features and functions of the print-and-cut system — is achievable in approximately three days. The any-FLOW interface is designed for practical efficiency rather than technical complexity, and the three-mode operating structure (print-and-cut, print only, cut only) allows operators to work within the configuration they need without navigating irrelevant system functions.
04. High-Durability Pigmented Aqueous Inkjet
The ANY-JET III’s print engine uses high-durability pigmented aqueous ink chemistry, producing output at 1600×1600 dpi. Pigmented inks offer superior lightfastness, water resistance, and durability compared to dye-based alternatives — making the ANY-JET III’s print output suitable for demanding label applications including outdoor environments, industrial packaging, and applications where label longevity is a requirement. Ink tank capacity is 10 litres per colour for sustained production runs.
05. 250W CO₂ Laser at 45 m/min
The 250W water-cooled CO2 laser operates at a maximum web speed of 45 m/min — production-class throughput that keeps finishing pace with high-output print runs. The 250W power level supports cutting of thicker substrates and demanding material types including film, flexible packaging materials, and heavier paper stocks without compromising cut quality or speed.
06. 350 mm Media Width, 324 mm Print Area
The ANY-JET III supports media up to 350mm wide with a print area of 324mm (12.75 inches) — the widest in the ANY-JET range. The cutting area spans 300mm wide with unlimited label length via split cut. An unwinder capable of handling rolls up to Ø700mm reduces the frequency of roll changeovers on extended runs.
07. any-FLOW Intelligent Inline Workflow Software
any-FLOW is the operational hub of the ANY-JET III. It handles RIP processing, variable data printing, colour management, file merging, media saving, job queuing, and laser parameter management from a single interface. Jobs can be added, re-prioritised, or deleted from the queue in real time. Any-FLOW supports three operating modes — print-and-cut, print only, cut only — making the ANY-JET III adaptable to different production workflows without hardware changes.
08. Autojob Changeover: QR Code-Based Automatic Transitions
The optional Autojob Changeover module on the ANY-JET III reads QR codes printed on each job to identify the required cutting configuration and loads the parameters automatically as the new job begins. Unlike the barcode-based approach used in some systems, QR code reading allows a richer set of job parameters to be encoded and transferred in a single scan — supporting more complex cutting configurations with no additional operator input required at changeover.
09. Thermal and Cold Lamination with Liner Removal
The ANY-JET III supports both thermal and cold lamination inline, with liner removal integrated as a standard workflow step. This flexibility means the machine can process laminated label formats across both lamination methods without a module swap or offline lamination run — thermal where durability and heat-bonded adhesion is required, cold where heat sensitivity is a concern.
10. Dual Rewinding, Splice Table, and Continuous Production
Built-in dual rewinding handles split output inline, and the integrated splice table allows the operator to join a new roll to an expiring roll mid-run without stopping production. Together, these features enable sustained, continuous production runs on the ANY-JET III without the roll-change downtime that limits throughput on systems without these capabilities.
11. Pneumatic Lift for Large Roll Handling — Optional
The optional pneumatic lift provides motorised, ergonomic loading of media rolls up to Ø700mm. At the production volumes the ANY-JET III is designed for, large rolls are the standard — and manual handling of rolls at this diameter and weight creates both a safety risk and a practical throughput constraint. The pneumatic lift eliminates both.
12. AIMS: Automatic Inline Management Software — Optional
The optional AIMS (Automatic Inline Management Software) provides advanced production monitoring and automation capabilities beyond the standard any-FLOW interface. For operations running the ANY-JET III as a core production asset, AIMS extends the system’s management capabilities across scheduling, monitoring, and workflow automation.
13. Five Finishing Functions in One Pass
Full cut, half cut (kiss cut), perforation, marking, and scribing are all supported within a single inline production pass. These finishing modes can be combined within a single label design, and all are executed alongside printing in the same automated sequence — no secondary runs, no offline finishing steps..
Specifications
Technical Specifications — ANY-JET III
| Category | Specification | Details |
|---|---|---|
| Media Handling | Max Media Width | 350 mm |
| Printing Area | 324 mm (12.75″) | |
| Cutting Area | 300 mm (width) × Unlimited (via split cut) | |
| Max Roll Diameter (Unwinder) | Ø700 mm | |
| Print Specifications | Print Engine | High Durability Pigmented Aqueous Ink-jet |
| Print Resolution | 1600 × 1600 dpi | |
| Ink | CMYK: 10 Liter ink for each color | |
| Cutting Specifications | Laser Power | 250W |
| Laser Cooling | Water-cooled | |
| Max Web Speed | 45 m/min | |
| Cutting Modes | Full-cut, half-cut, perforation, marking, and scribing (one process) | |
| Web Handling System | Unwinder | Built-in (optional Pneumatic Lift available) |
| Web Guide | Yes — inline | |
| Splice Table | Yes | |
| Laminator | Thermal and Cold lamination with liner removal | |
| Rewinder | Dual rewinding system — built-in | |
| Matrix Removal | Yes | |
| Slitter | Yes | |
| Software | Workflow Software | any-FLOW — Intelligent Inline Workflow Software |
| RIP Functions | Variable data printing, colour management, file merging, media saving | |
| Operating Modes | Print & cut / Print only / Cut only | |
| Job Management | Add, delete, and re-prioritise jobs in the queue in real time | |
| Electrical Specifications | Power | 220AC 40Amp |
| Machine Dimensions | Width (W) | 4616 mm |
| Depth (D) | 1885 mm | |
| Height (H) | 1215 mm | |
| Optional Items | Autojob Changeover | QR code-based automatic cutting parameter updates between jobs — no operator intervention required |
| AIMS | Automatic Inline Management Software — advanced production monitoring and automation | |
| Pneumatic Lift | Motorised roll loading for ergonomic handling of large media rolls up to Ø700 mm | |
| Thermal Lamination | Optional thermal lamination module in addition to standard cold lamination capability |
FAQs
The ANY-JET III is a production-class fully digital inline label press. It combines a high-durability pigmented aqueous inkjet print engine with a 250W CO2 laser finishing system on a single integrated platform, handling printing, laminating, laser die-cutting, matrix removal, slitting, and dual rewinding in one automated inline pass.
The ANY-JET III uses high-durability pigmented aqueous inkjet ink, producing output at 1600×1600 dpi in full CMYK. Pigmented ink chemistry provides improved durability and resistance compared to dye-based systems, making the output suitable for demanding label applications. Ink tank capacity is 10 litres per colour.
The ANY-JET III’s laser system operates at a maximum web speed of 45 m/min. Print speed varies by job and quality requirements.
The ANY-JET III supports media up to 350mm wide, with a printing area of 324mm (12.75 inches) and a cutting area of 300mm wide with unlimited label length via split cut.
any-FLOW is the ANY-JET III’s intelligent inline workflow software. It manages the complete production pipeline — RIP processing, colour management, variable data printing, laser parameter control, and job queue management — from a single operator interface. It supports three operating modes: print-and-cut, print only, and cut only.
The optional Autojob Changeover module reads a QR code printed on each job to identify the required cutting configuration and automatically updates the laser parameters as the new job begins. This allows the machine to transition between different label formats without stopping or requiring manual parameter entry between changeovers.
The ANY-JET III supports both thermal and cold lamination inline, with liner removal integrated as a standard workflow step. Thermal lamination is available as an optional module upgrade.
Yes. Via the any-FLOW print-only and cut-only modes, the ANY-JET III can operate as a standalone inkjet press or a standalone laser cutter without hardware reconfiguration.
AIMS (Automatic Inline Management Software) is an optional module providing advanced production monitoring and automation capabilities for the ANY-JET III, extending beyond the standard any-FLOW interface for operations that require higher-level production management.
The ANY-JET III supports full cut, half cut (kiss cut), perforation, marking, and scribing — all executable within a single inline pass alongside printing.
The ANY-JET III requires 220AC 40Amp. This is a higher power requirement than the ANY-JET II and should be confirmed with facilities before installation.
Width 4616 mm x Depth 1885 mm x Height 1215 mm.