ANY-JET II — In-House Fully Digital Inline Label Press
Short-run label printing made easy. Print, laminate, cut, and finish — in a single automated pass, without a single die or plate.
The ANY-JET II is a fully digital inline label press that brings print and finish under one roof — on one machine, in one pass. It combines a high-resolution single-pass CMYK inkjet print engine with a 125W water-cooled CO2 laser finishing system, handling the entire label production sequence from printing through laminating, laser die-cutting, matrix removal, and slitting without any offline handling steps or physical cutting tooling.
Designed for businesses that want to produce short-run, customised labels entirely in-house, the ANY-JET II removes the two biggest barriers to in-house label production: the cost of outsourcing print runs, and the tooling cost and lead time of conventional die-based finishing. There are no plates to order, no dies to fabricate, and no minimum run lengths imposed by tooling amortisation. Every job — regardless of volume — runs at the same digital cost structure.
The ANY-JET II fits in a standard office environment, plugs into a standard power supply, and produces finished labels at 1600×1600 dpi print resolution with a maximum print speed of 18 m/min. It supports both digital label and flexible packaging applications, and can also be operated as a standalone inkjet printer or a standalone laser cutter depending on production requirements.
125W
Water-Cooled CO₂ Laser
1600 × 1600 dpi
Print Resolution
250 mm
Max Media Width
3 – 18 m/min
Print Speed (variable)
20 m/min
Max Web Speed
AC 220–240V
Single Phase Power
2410 × 1110 × 1740 mm
Machine Dimensions
Overview
Features
Specifications
Overview
ANY-JET II — 100% Digital Inline Label Press (Print to Finish)
The ANY-JET II is a 100% digital inline label press. It eliminates the gap that exists in most label production operations between the print stage and the finishing stage — the moment where a printed roll has to be transferred, loaded onto a separate machine, set up with physical tooling, and run through a conventional finishing process. On the ANY-JET II, that gap does not exist. Print output feeds directly into the finishing sequence, and finished labels emerge from the other end of the same machine.
At the print stage, a single-pass CMYK inkjet engine delivers 1600×1600 dpi resolution at variable speeds between 3 m/min and 18 m/min, with 2-litre ink tanks per colour ensuring sustained print runs without interruption. At the finishing stage, a 125W CO2 laser handles full cuts, half cuts, perforations, marking, and scribing — all in the same pass as printing, with a maximum web speed of 20 m/min through the cutting system.
Between print and finish, an integrated web guide maintains media alignment, and the optional Autojob Changeover module reads barcodes on incoming jobs to update cutting parameters automatically — allowing the machine to transition between different label formats without stopping. A laminator and liner removal module, splice table, matrix removal system, slitter, and dual rewinding system complete the inline process, handling every step of the post-print finishing sequence without any manual intervention.
Features
Outcome-led feature blocks. Each reads as a concrete benefit.
01. 100% Digital: No Tooling of Any Kind
The ANY-JET II is built on a fully tooling-free operating principle. Label shapes are defined in software. The CO2 laser executes the cut path directly, without any intermediate physical tool — no rotary dies, no knife dies, no steel-rule dies, no flexible plates. The implications are straightforward: there is nothing to order before a new job can start, nothing to change between jobs, and nothing to replace when it wears out. The only thing that changes between label formats is a digital file.
02. Compact and Office-Ready
At 2410mm wide x 1110mm deep x 1740mm tall, the ANY-JET II is designed to sit in an office or light production environment without specialist infrastructure. It operates on AC 220-240V Single Phase — a standard commercial power supply in most markets — and does not require three-phase wiring, compressed air, or a ventilated production room. For businesses that want in-house label production capability without a facility build-out, the ANY-JET II removes that barrier.
03. 1600 × 1600 dpi Print Quality
Print output from the ANY-JET II’s single-pass inkjet engine is produced at 1600×1600 dpi in full CMYK colour. This resolution level supports fine-detail label artwork, small text, and colour-critical brand printing — the standard expected of professional label output rather than in-house convenience printing. Ink capacity is 2 litres per colour, meaning extended print runs can be completed without interruption for ink replacement.
04. Variable Print Speed: 3 – 18 m/min
Print speed on the ANY-JET II is variable between 3 m/min and 18 m/min, allowing the operator to match print speed to the complexity and quality requirements of each job. Lower speeds support finer detail and denser ink coverage. Higher speeds maximise throughput for simpler artwork and longer runs. The laser finishing system operates at a maximum web speed of 20 m/min, ensuring the cutting stage does not create a bottleneck behind the print stage.
05. Five Finishing Functions in One Pass
The ANY-JET II executes full cut, half cut, perforation, marking, and scribing within a single label production pass. These finishing operations are combined with printing in the same inline sequence — there is no separate finishing run, no roll handling between stages, and no additional machine time. Labels arrive at the output already cut, marked, and finished to specification.
06. Integrated Laminator and Liner Removal
A laminator and liner removal module is integrated into the ANY-JET II’s inline workflow as a standard component. Lamination is applied and the liner removed within the same automated sequence as printing and cutting — without requiring a separate laminating pass or offline step.
07. Splice Table for Continuous Production
The ANY-JET II includes a splice table that allows the operator to join the leading edge of a new roll to the trailing edge of an expiring roll mid-production. This enables continuous production runs without full machine stops for roll changeovers — maintaining throughput during extended runs.
08. Dual Rewinding System
Built-in dual rewinding handles the finished label output in split configurations without a separate offline rewinder. Both output streams are managed inline, keeping the entire print-to-finish process on a single platform.
09. Autojob Changeover — Optional
The optional Autojob Changeover module reads the barcode of each incoming job and automatically updates the laser cutting parameters to match. This allows the ANY-JET II to transition between different label formats without stopping between jobs — one operator can manage a full multi-format production run without manually re-entering cutting parameters for each changeover.
10. Dual-Mode Operation: Combined or Standalone
The ANY-JET II can be used as a combined print-and-cut system, as a standalone inkjet printer for printing onto flexible packaging film or pre-cut media, or as a standalone laser cutter paired with print output from any other source. This operational flexibility allows the machine to adapt to different production configurations without hardware reconfiguration.
11. Cutting Area: 225 mm × Unlimited Length
The ANY-JET II’s cutting area spans 225mm wide with unlimited label length via split cut. Labels of any length — including extended-format or banner-style labels — are handled without hardware modifications or job reconfiguration.
Specifications
Technical Specifications — ANY-JET II
| Category | Specification | Details |
|---|---|---|
| Media Handling | Max Media Width | 250 mm |
| Cutting Area | 225 mm (width) × Unlimited (via split cut) | |
| Max Roll Diameter | 300 mm | |
| Print Specifications | Print Engine | Single-pass Inkjet Printer |
| Print Resolution | 1600 × 1600 dpi | |
| Print Speed | Variable — 3 m/min to 18 m/min | |
| Ink | CMYK: 2 Liter ink for each color | |
| Cutting Specifications | Laser Power | 125W |
| Laser Cooling | Water-cooled | |
| Max Web Speed | 20 m/min | |
| Cutting Modes | Full-cut, half-cut, perforation, marking, and scribing (one process) | |
| Web Handling System | Unwinder | Built-in |
| Rewinder | Built-in dual rewinder | |
| Laminator & Liner Removal | Yes — integrated standard | |
| Matrix Removal | Yes | |
| Slitter | Yes | |
| Splice Table | Yes | |
| Electrical Specifications | Power Supply | AC 220–240V Single Phase |
| Machine Dimensions | Width (W) | 2410 mm |
| Depth (D) | 1110 mm | |
| Height (H) | 1740 mm | |
| Optional Items | Autojob Changeover | Reads job barcodes and automatically updates cutting parameters between jobs without operator intervention or machine stops |
FAQs
The ANY-JET II is a fully digital inline label press that combines a CMYK inkjet print engine and a CO2 laser finishing system on a single integrated platform. It handles printing, laminating, laser die-cutting, matrix removal, and slitting in one continuous automated pass, without the use of physical dies, plates, or cutting tooling.
The ANY-JET II’s single-pass inkjet engine prints at 1600×1600 dpi in full CMYK colour, with 2-litre ink tanks per colour for sustained production runs.
Print speed is variable between 3 m/min and 18 m/min. The laser finishing system operates at a maximum web speed of 20 m/min.
The ANY-JET II supports full cut, half cut (kiss cut), perforation, marking, and scribing — all executable within a single inline pass alongside printing.
The ANY-JET II supports a maximum media width of 250 mm, with a cutting area of 225 mm wide and unlimited label length via split cut.
Yes. The ANY-JET II supports flexible packaging film printing with inline lamination, scribing, perforation, and slitting — in the same workflow as digital label production.
Autojob Changeover is an optional module that reads the barcode printed on each incoming job and automatically updates the laser cutting parameters. This allows the machine to transition between different label formats without stopping or requiring the operator to manually re-enter cutting settings for each new job.
Yes. The ANY-JET II can be operated as a combined print-and-cut system, as a standalone inkjet printer for printing on flexible packaging or other media, or as a standalone laser cutter paired with print output from any other source.
The ANY-JET II operates on AC 220-240V Single Phase. It does not require three-phase wiring or specialist electrical installation.
Width 2410 mm x Depth 1110 mm x Height 1740 mm.
No. The ANY-JET II is a fully die-free system. All label geometries are defined in software and executed directly by the CO2 laser. There are no dies, plates, or cutting inserts of any kind in the finishing process.