Lemorau M EBR+ Modular Finishing System

The MEBR+ from Lemorau is a fully modular finishing system that can be upgraded as need to add a variety of features. It can come as a 260mm or 330mm web width standard, and can also be upgraded to be used as a 400mm or 450mm web width. The M EBR+ can be used to cut pre-printed labels, or create pre-cut roll labels with ease.

Lemorau M EBR+ is a digital finishing machine built with a modular concept where modules can be added according to the customer needs. Lemorau M EBR+ runs in full rotary and semi-rotary mode. Semi-rotary for short runs and full rotary for high speed longer runs. The registration tolerance is maintained during acceleration, deceleration, and production time due to the latest servo technology. Lemorau M EBR+ is equipped with servo-driven compensator system which provides superior web tension control when the machine is running in semi-rotary mode.

Standard Features

  • Maximum rotary speed 200 m/min (656 ft/min.) – Blank labels
  • Maximum rotary speed 120 m/min (394 ft/min.) – Die cutting to register
  • Maximum semi-rotary speed 40 m/min (131 ft/min.) dependent on plate size – Die cutting to register
  • Web width 250, 330, 400 mm (10, 13, 16 in)
  • Electronic Counter (Labels/ Meters/ Rolls counter/ Total meters and labels Counter)
    Adjustable splice table with pneumatic clamps
  • Electronic web guide system with ultrasonic sensor which enables guiding of opaque and clear materials
  • Automatic web tension control system by servo motors – Constant and Taper tension;
    250 Job memory for easy and quick job set ups
  • 6 sets of circular knives with lateral adjustment
  • 2 interchangeable pneumatic rewinders of 25, 40 and 76 mm diameter (1, 1.5, 3 in);
    Paper and matrix break detection
  • Labels in/ labels out rewinding
  • Remote assistance through internet connection
  • Automatic stop at master roll end with programmable end of roll function
  • Semi- Automatic rewinding
  • Foot pedal to jog the machine
  • Multi language touch screen
  • Die repeats 203,20 – 431,80 mm (8 – 17 in) – Rotary mode
  • Die repeats 41,30- 371,00 mm (1,6 – 14,6 in) – Semi-Rotary mode
  • Max rewinder diameter: 600 mm (23.7 in) for 1 shaft / 350 mm (13.8 in) for 2 shafts
  • Maximum unwinder diameter 700 mm (27.5 in)
  • CE conformity certificated, user manual and electrical scheme

Optional Features

  • Additional mandrels in customized sizes
  • Additional rotary die station
  • Additional slitting knives
  • Air trim removal
  • Anti-static bar
  • Anvil roll with adjustable gap
  • Back scorer unit
  • Booklet label module
  • Clear on clear sensor
  • Conveyor
  • Corona treatment
  • Digital printing module Inkjet water based CMYK
  • Digital printing module UV Inkjet 4-6 colors, White, Varnish
  • Easy strip waste rewinder
  • Lamination station
  • Modular 1m (3.3 ft) unwinder diameter
  • Multi layer labels
  • Pressure gauges for die cutting unit
  • Razor slitting knives
  • Turret rewinding
  • UV Flexo-varnish module
  • Web cleaner
Modular Roll-to-Roll Finishing System

The MEBR+ is a modular finishing system that allows customers to add additional finishing capabilities as needed.

Upgrade to fit your business' needs!

It starts off as a full functioning semi-rotary finisher, which can be upgraded with inline foiling, air-trim slitting stations, back scoring module, and more!

Increased Job Memory

Save up to 250 jobs for a quick and easy set up every time!